Protocol documentation

Sources:

Original Bitcoin client source

Type names used in this documentation are from the C99 standard.

For protocol used in mining, see getblocktemplate.

Common standards

Hashes

Usually, when a hash is computed within bitcoin, it is computed twice. Most of the time SHA-256 hashes are used, however RIPEMD-160 is also used when a shorter hash is desirable (for example when creating a bitcoin address).

Example of double-SHA-256 encoding of string "hello":

hello
2cf24dba5fb0a30e26e83b2ac5b9e29e1b161e5c1fa7425e73043362938b9824 (first round of sha-256)
9595c9df90075148eb06860365df33584b75bff782a510c6cd4883a419833d50 (second round of sha-256)

For bitcoin addresses (RIPEMD-160) this would give:

hello
2cf24dba5fb0a30e26e83b2ac5b9e29e1b161e5c1fa7425e73043362938b9824 (first round is sha-256)
b6a9c8c230722b7c748331a8b450f05566dc7d0f (with ripemd-160)

Merkle Trees

Merkle trees are binary trees of hashes. Merkle trees in bitcoin use a double SHA-256, the SHA-256 hash of the SHA-256 hash of something.

If, when forming a row in the tree (other than the root of the tree), it would have an odd number of elements, the final double-hash is duplicated to ensure that the row has an even number of hashes.

First form the bottom row of the tree with the ordered double-SHA-256 hashes of the byte streams of the transactions in the block.

Then the row above it consists of half that number of hashes. Each entry is the double-SHA-256 of the 64-byte concatenation of the corresponding two hashes below it in the tree.

This procedure repeats recursively until we reach a row consisting of just a single double-hash. This is the Merkle root of the tree.

For example, imagine a block with three transactions a, b and c. The Merkle tree is:

d1 = dhash(a)
d2 = dhash(b)
d3 = dhash(c)
d4 = dhash(c)            # a, b, c are 3. that's an odd number, so we take the c twice

d5 = dhash(d1 concat d2)
d6 = dhash(d3 concat d4)

d7 = dhash(d5 concat d6)

where

dhash(a) = sha256(sha256(a))

d7 is the Merkle root of the 3 transactions in this block.

Note: Hashes in Merkle Tree displayed in the Block Explorer are of little-endian notation. For some implementations and calculations, the bits need to be reversed before they are hashed, and again after the hashing operation.

Signatures

Bitcoin uses Elliptic Curve Digital Signature Algorithm (ECDSA) to sign transactions.

For ECDSA the secp256k1 curve from http://www.secg.org/collateral/sec2_final.pdf is used.

Public keys (in scripts) are given as 04 <x> <y> where x and y are 32 byte big-endian integers representing the coordinates of a point on the curve or in compressed form given as <sign> <x> where <sign> is 0x02 if y is even and 0x03 if y is odd.

Signatures use DER encoding to pack the r and s components into a single byte stream (this is also what OpenSSL produces by default).

Transaction Verification

Transactions are cryptographically signed records that reassign ownership of Bitcoins to new addresses. Transactions have inputs - records which reference the funds from other previous transactions - and outputs - records which determine the new owner of the transferred Bitcoins, and which will be referenced as inputs in future transactions as those funds are respent.

Each input must have a cryptographic digital signature that unlocks the funds from the prior transaction. Only the person possessing the appropriate private key is able to create a satisfactory signature; this in effect ensures that funds can only be spent by their owners.

Each output determines which Bitcoin address (or other criteria, see Scripting) is the recipient of the funds.

In a transaction, the sum of all inputs must be equal to or greater than the sum of all outputs. If the inputs exceed the outputs, the difference is considered a transaction fee, and is redeemable by whoever first includes the transaction into the block chain.

A special kind of transaction, called a coinbase transaction, has no inputs. It is created by miners, and there is one coinbase transaction per block. Because each block comes with a reward of newly created Bitcoins (e.g. 50 BTC for the first 210,000 blocks), the first transaction of a block is, with few exceptions, the transaction that grants those coins to their recipient (the miner). In addition to the newly created Bitcoins, the coinbase transaction is also used for assigning the recipient of any transaction fees that were paid within the other transactions being included in the same block. The coinbase transaction can assign the entire reward to a single Bitcoin address, or split it in portions among multiple addresses, just like any other transaction. Coinbase transactions always contain outputs totalling the sum of the block reward plus all transaction fees collected from the other transactions in the same block.

The coinbase transaction in block zero cannot be spent. This is due to a quirk of the reference client implementation that would open the potential for a block chain fork if some nodes accepted the spend and others did not^[1].

Most Bitcoin outputs encumber the newly transferred coins with a single ECDSA private key. The actual record saved with inputs and outputs isn't necessarily a key, but a script. Bitcoin uses an interpreted scripting system to determine whether an output's criteria have been satisfied, with which more complex operations are possible, such as outputs that require two ECDSA signatures, or two-of-three-signature schemes. An output that references a single Bitcoin address is a typical output; an output actually contains this information in the form of a script that requires a single ECDSA signature (see OP_CHECKSIG). The output script specifies what must be provided to unlock the funds later, and when the time comes in the future to spend the transaction in another input, that input must provide all of the thing(s) that satisfy the requirements defined by the original output script.

Addresses

A bitcoin address is in fact the hash of a ECDSA public key, computed this way:

Version = 1 byte of 0 (zero); on the test network, this is 1 byte of 111
Key hash = Version concatenated with RIPEMD-160(SHA-256(public key))
Checksum = 1st 4 bytes of SHA-256(SHA-256(Key hash))
Bitcoin Address = Base58Encode(Key hash concatenated with Checksum)

The Base58 encoding used is home made, and has some differences. Especially, leading zeroes are kept as single zeroes when conversion happens.

Common structures

Almost all integers are encoded in little endian. Only IP or port number are encoded big endian.

Message structure

Field Size	Description	Data type	Comments
4	magic	uint32_t	Magic value indicating message origin network, and used to seek to next message when stream state is unknown
12	command	char[12]	ASCII string identifying the packet content, NULL padded (non-NULL padding results in packet rejected)
4	length	uint32_t	Length of payload in number of bytes
4	checksum	uint32_t	First 4 bytes of sha256(sha256(payload))
?	payload	uchar[]	The actual data

Known magic values:

Network	Magic value	Sent over wire as
main	0xD9B4BEF9	F9 BE B4 D9
testnet	0xDAB5BFFA	FA BF B5 DA
testnet3	0x0709110B	0B 11 09 07
namecoin	0xFEB4BEF9	F9 BE B4 FE

Variable length integer

Integer can be encoded depending on the represented value to save space. Variable length integers always precede an array/vector of a type of data that may vary in length. Longer numbers are encoded in little endian.

Value	Storage length	Format
< 0xfd	1	uint8_t
<= 0xffff	3	0xfd followed by the length as uint16_t
<= 0xffffffff	5	0xfe followed by the length as uint32_t
-	9	0xff followed by the length as uint64_t

If you're reading the Satoshi client code (BitcoinQT) it refers to this as a "CompactSize". Modern BitcoinQT has also CVarInt class which implements even more compact integer for the purpose of local storage (which is incompatible with "CompactSize" described here). CVarInt is not a part of the protocol.

Variable length string

Variable length string can be stored using a variable length integer followed by the string itself.

Field Size	Description	Data type	Comments
?	length	var_int	Length of the string
?	string	char[]	The string itself (can be empty)

Network address

When a network address is needed somewhere, this structure is used. This protocol and structure supports IPv6, but note that the original client currently only supports IPv4 networking. Network addresses are not prefixed with a timestamp in the version message.

Field Size	Description	Data type	Comments
4	time	uint32	the Time (version >= 31402)
8	services	uint64_t	same service(s) listed in version
16	IPv6/4	char[16]	IPv6 address. Network byte order. The original client only supports IPv4 and only reads the last 4 bytes to get the IPv4 address. However, the IPv4 address is written into the message as a 16 byte IPv4-mapped IPv6 address (12 bytes 00 00 00 00 00 00 00 00 00 00 FF FF, followed by the 4 bytes of the IPv4 address).
2	port	uint16_t	port number, network byte order

Hexdump example of Network address structure

0000   01 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  ................
0010   00 00 FF FF 0A 00 00 01  20 8D                    ........ .

Network address:
 01 00 00 00 00 00 00 00                         - 1 (NODE_NETWORK: see services listed under version command)
 00 00 00 00 00 00 00 00 00 00 FF FF 0A 00 00 01 - IPv6: ::ffff:a00:1 or IPv4: 10.0.0.1
 20 8D                                           - Port 8333

Inventory Vectors

Inventory vectors are used for notifying other nodes about objects they have or data which is being requested.

Inventory vectors consist of the following data format:

Field Size	Description	Data type	Comments
4	type	uint32_t	Identifies the object type linked to this inventory
32	hash	char[32]	Hash of the object

The object type is currently defined as one of the following possibilities:

Value	Name	Description
0	ERROR	Any data of with this number may be ignored
1	MSG_TX	Hash is related to a transaction
2	MSG_BLOCK	Hash is related to a data block

Other Data Type values are considered reserved for future implementations.

Block Headers

Block headers are sent in a headers packet in response to a getheaders message.

Field Size	Description	Data type	Comments
4	version	uint32_t	Block version information, based upon the software version creating this block
32	prev_block	char[32]	The hash value of the previous block this particular block references
32	merkle_root	char[32]	The reference to a Merkle tree collection which is a hash of all transactions related to this block
4	timestamp	uint32_t	A timestamp recording when this block was created (Will overflow in 2106^[2])
4	bits	uint32_t	The calculated difficulty target being used for this block
4	nonce	uint32_t	The nonce used to generate this block… to allow variations of the header and compute different hashes
1	txn_count	var_int	Number of transaction entries, this value is always 0

Message types

version

When a node creates an outgoing connection, it will immediately advertise its version. The remote node will respond with its version. No further communication is possible until both peers have exchanged their version.

Payload:

Field Size	Description	Data type	Comments
4	version	int32_t	Identifies protocol version being used by the node
8	services	uint64_t	bitfield of features to be enabled for this connection
8	timestamp	int64_t	standard UNIX timestamp in seconds
26	addr_recv	net_addr	The network address of the node receiving this message
version >= 106
26	addr_from	net_addr	The network address of the node emitting this message
8	nonce	uint64_t	Node random nonce, randomly generated every time a version packet is sent. This nonce is used to detect connections to self.
?	user_agent	var_str	User Agent (0x00 if string is 0 bytes long)
4	start_height	int32_t	The last block received by the emitting node
1	relay	bool	Whether the remote peer should announce relayed transactions or not, see BIP 0037, since version >= 70001

A "verack" packet shall be sent if the version packet was accepted.

The following services are currently assigned:

Value	Name	Description
1	NODE_NETWORK	This node can be asked for full blocks instead of just headers.

Hexdump example of version message (OBSOLETE EXAMPLE. This example lacks a checksum and user-agent):

0000   F9 BE B4 D9 76 65 72 73  69 6F 6E 00 00 00 00 00   ....version.....
0010   55 00 00 00 9C 7C 00 00  01 00 00 00 00 00 00 00   U....|..........
0020   E6 15 10 4D 00 00 00 00  01 00 00 00 00 00 00 00   ...M............
0030   00 00 00 00 00 00 00 00  00 00 FF FF 0A 00 00 01   ................
0040   20 8D 01 00 00 00 00 00  00 00 00 00 00 00 00 00   ................
0050   00 00 00 00 FF FF 0A 00  00 02 20 8D DD 9D 20 2C   .......... ... ,
0060   3A B4 57 13 00 55 81 01  00                        :.W..U...

Message header:
 F9 BE B4 D9                                                                   - Main network magic bytes
 76 65 72 73 69 6F 6E 00 00 00 00 00                                           - "version" command
 55 00 00 00                                                                   - Payload is 85 bytes long
                                                                               - No checksum in version message until 20 February 2012. See https://bitcointalk.org/index.php?topic=55852.0
Version message:
 9C 7C 00 00                                                                   - 31900 (version 0.3.19)
 01 00 00 00 00 00 00 00                                                       - 1 (NODE_NETWORK services)
 E6 15 10 4D 00 00 00 00                                                       - Mon Dec 20 21:50:14 EST 2010
 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 0A 00 00 01 20 8D - Recipient address info - see Network Address
 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 0A 00 00 02 20 8D - Sender address info - see Network Address
 DD 9D 20 2C 3A B4 57 13                                                       - Node random unique ID
 00                                                                            - "" sub-version string (string is 0 bytes long)
 55 81 01 00                                                                   - Last block sending node has is block #98645

And here's a modern (60002) protocol version client advertising itself to a local peer...

Newer protocol includes the checksum now, this is from a mainline (satoshi) client during an outgoing connection to another local client, notice that it does not fill out the address information at all when the source or destination is "unroutable".


0000   f9 be b4 d9 76 65 72 73 69 6f 6e 00 00 00 00 00  ....version.....
0010   64 00 00 00 35 8d 49 32 62 ea 00 00 01 00 00 00  d...5.I2b.......
0020   00 00 00 00 11 b2 d0 50 00 00 00 00 01 00 00 00  .......P........
0030   00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff  ................
0040   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
0050   00 00 00 00 00 00 00 00 ff ff 00 00 00 00 00 00  ................
0060   3b 2e b3 5d 8c e6 17 65 0f 2f 53 61 74 6f 73 68  ;..]...e./Satosh
0070   69 3a 30 2e 37 2e 32 2f c0 3e 03 00              i:0.7.2/.>..

Message Header:
 F9 BE B4 D9                                                                   - Main network magic bytes
 76 65 72 73 69 6F 6E 00 00 00 00 00                                           - "version" command
 64 00 00 00                                                                   - Payload is 100 bytes long
 3B 64 8D 5A                                                                   - payload checksum

Version message:
 62 EA 00 00                                                                   - 60002 (protocol version 60002)
 01 00 00 00 00 00 00 00                                                       - 1 (NODE_NETWORK services)
 11 B2 D0 50 00 00 00 00                                                       - Tue Dec 18 10:12:33 PST 2012
 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 00 00 00 00 00 00 - Recipient address info - see Network Address
 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 00 00 00 00 00 00 - Sender address info - see Network Address
 3B 2E B3 5D 8C E6 17 65                                                       - Node ID
 0F 2F 53 61 74 6F 73 68 69 3A 30 2E 37 2E 32 2F                               - "/Satoshi:0.7.2/" sub-version string (string is 15 bytes long)
 C0 3E 03 00                                                                   - Last block sending node has is block #212672

verack

The verack message is sent in reply to version. This message consists of only a message header with the command string "verack".

Hexdump of the verack message:

0000   F9 BE B4 D9 76 65 72 61  63 6B 00 00 00 00 00 00   ....verack......
0010   00 00 00 00 5D F6 E0 E2                            ........

Message header:
 F9 BE B4 D9                          - Main network magic bytes
 76 65 72 61  63 6B 00 00 00 00 00 00 - "verack" command
 00 00 00 00                          - Payload is 0 bytes long
 5D F6 E0 E2                          - Checksum

addr

Provide information on known nodes of the network. Non-advertised nodes should be forgotten after typically 3 hours

Payload:

Field Size	Description	Data type	Comments
1+	count	var_int	Number of address entries (max: 1000)
30x?	addr_list	(uint32_t + net_addr)[]	Address of other nodes on the network. version < 209 will only read the first one. The uint32_t is a timestamp (see note below).

Note: Starting version 31402, addresses are prefixed with a timestamp. If no timestamp is present, the addresses should not be relayed to other peers, unless it is indeed confirmed they are up.

Hexdump example of addr message:

0000   F9 BE B4 D9 61 64 64 72  00 00 00 00 00 00 00 00   ....addr........
0010   1F 00 00 00 ED 52 39 9B  01 E2 15 10 4D 01 00 00   .....R9.....M...
0020   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 FF   ................
0030   FF 0A 00 00 01 20 8D                               ..... .

Message Header:
 F9 BE B4 D9                                     - Main network magic bytes
 61 64 64 72  00 00 00 00 00 00 00 00            - "addr"
 1F 00 00 00                                     - payload is 31 bytes long
 ED 52 39 9B                                     - checksum of payload

Payload:
 01                                              - 1 address in this message

Address:
 E2 15 10 4D                                     - Mon Dec 20 21:50:10 EST 2010 (only when version is >= 31402)
 01 00 00 00 00 00 00 00                         - 1 (NODE_NETWORK service - see version message)
 00 00 00 00 00 00 00 00 00 00 FF FF 0A 00 00 01 - IPv4: 10.0.0.1, IPv6: ::ffff:10.0.0.1 (IPv4-mapped IPv6 address)
 20 8D                                           - port 8333

inv

Allows a node to advertise its knowledge of one or more objects. It can be received unsolicited, or in reply to getblocks.

Payload (maximum payload length: 1.8 Megabytes or 50000 entries):

Field Size	Description	Data type	Comments
?	count	var_int	Number of inventory entries
36x?	inventory	inv_vect[]	Inventory vectors

getdata

getdata is used in response to inv, to retrieve the content of a specific object, and is usually sent after receiving an inv packet, after filtering known elements. It can be used to retrieve transactions, but only if they are in the memory pool or relay set - arbitrary access to transactions in the chain is not allowed to avoid having clients start to depend on nodes having full transaction indexes (which modern nodes do not).

Payload (maximum payload length: 1.8 Megabytes or 50000 entries):

Field Size	Description	Data type	Comments
?	count	var_int	Number of inventory entries
36x?	inventory	inv_vect[]	Inventory vectors

notfound

notfound is a response to a getdata, sent if any requested data items could not be relayed, for example, because the requested transaction was not in the memory pool or relay set.

Field Size	Description	Data type	Comments
?	count	var_int	Number of inventory entries
36x?	inventory	inv_vect[]	Inventory vectors

getblocks

Return an inv packet containing the list of blocks starting right after the last known hash in the block locator object, up to hash_stop or 500 blocks, whichever comes first.

The locator hashes are processed by a node in the order as they appear in the message. If a block hash is found in the node's main chain, the list of its children is returned back via the inv message and the remaining locators are ignored, no matter if the requested limit was reached, or not.

To receive the next blocks hashes, one needs to issue getblocks again with a new block locator object. Keep in mind that some clients (specifically the Satoshi client) will gladly provide blocks which are invalid if the block locator object contains a hash on the invalid branch.

Payload:

Field Size	Description	Data type	Comments
4	version	uint32_t	the protocol version
1+	hash count	var_int	number of block locator hash entries
32+	block locator hashes	char[32]	block locator object; newest back to genesis block (dense to start, but then sparse)
32	hash_stop	char[32]	hash of the last desired block; set to zero to get as many blocks as possible (500)

To create the block locator hashes, keep pushing hashes until you go back to the genesis block. After pushing 10 hashes back, the step backwards doubles every loop:

// From libbitcoin which is under AGPL
std::vector<size_t> block_locator_indices(int top_depth)
{
    // Start at max_depth
    std::vector<size_t> indices;
    // Push last 10 indices first
    size_t step = 1, start = 0;
    for (int i = top_depth; i > 0; i -= step, ++start)
    {
        if (start >= 10)
            step *= 2;
        indices.push_back(i);
    }
    indices.push_back(0);
    return indices;
}

Note that it is allowed to send in fewer known hashes down to a minimum of just one hash. However, the purpose of the block locator object is to detect a wrong branch in the caller's main chain. If the peer detects that you are off the main chain, it will send in block hashes which are earlier than your last known block. So if you just send in your last known hash and it is off the main chain, the peer starts over at block #1.

getheaders

Return a headers packet containing the headers of blocks starting right after the last known hash in the block locator object, up to hash_stop or 2000 blocks, whichever comes first. To receive the next block headers, one needs to issue getheaders again with a new block locator object. The getheaders command is used by thin clients to quickly download the block chain where the contents of the transactions would be irrelevant (because they are not ours). Keep in mind that some clients (specifically the Satoshi client) will gladly provide headers of blocks which are invalid if the block locator object contains a hash on the invalid branch.

Payload:

Field Size	Description	Data type	Comments
4	version	uint32_t	the protocol version
1+	hash count	var_int	number of block locator hash entries
32+	block locator hashes	char[32]	block locator object; newest back to genesis block (dense to start, but then sparse)
32	hash_stop	char[32]	hash of the last desired block header; set to zero to get as many blocks as possible (2000)

For the block locator object in this packet, the same rules apply as for the getblocks packet.

tx

tx describes a bitcoin transaction, in reply to getdata

Field Size

Description

Data type

Comments

4

version

uint32_t

Transaction data format version

1+

tx_in count

var_int

Number of Transaction inputs

41+

tx_in

tx_in[]

A list of 1 or more transaction inputs or sources for coins

1+

tx_out count

var_int

Number of Transaction outputs

9+

tx_out

tx_out[]

A list of 1 or more transaction outputs or destinations for coins

4

lock_time

uint32_t

The block number or timestamp at which this transaction is locked:

Value	Description
0	Always locked
< 500000000	Block number at which this transaction is locked
>= 500000000	UNIX timestamp at which this transaction is locked

If all TxIn inputs have final (0xffffffff) sequence numbers then lock_time is irrelevant. Otherwise, the transaction may not be added to a block until after lock_time (see NLockTime).

TxIn consists of the following fields:

Field Size	Description	Data type	Comments
36	previous_output	outpoint	The previous output transaction reference, as an OutPoint structure
1+	script length	var_int	The length of the signature script
?	signature script	uchar[]	Computational Script for confirming transaction authorization
4	sequence	uint32_t	Transaction version as defined by the sender. Intended for "replacement" of transactions when information is updated before inclusion into a block.

The OutPoint structure consists of the following fields:

Field Size	Description	Data type	Comments
32	hash	char[32]	The hash of the referenced transaction.
4	index	uint32_t	The index of the specific output in the transaction. The first output is 0, etc.

The Script structure consists of a series of pieces of information and operations related to the value of the transaction.

(Structure to be expanded in the future… see script.h and script.cpp and Script for more information)

The TxOut structure consists of the following fields:

Field Size	Description	Data type	Comments
8	value	int64_t	Transaction Value
1+	pk_script length	var_int	Length of the pk_script
?	pk_script	uchar[]	Usually contains the public key as a Bitcoin script setting up conditions to claim this output.

Example tx message:

000000	F9 BE B4 D9 74 78 00 00  00 00 00 00 00 00 00 00   ....tx..........
000010	02 01 00 00 E2 93 CD BE  01 00 00 00 01 6D BD DB   .............m..
000020	08 5B 1D 8A F7 51 84 F0  BC 01 FA D5 8D 12 66 E9   .[...Q........f.
000030	B6 3B 50 88 19 90 E4 B4  0D 6A EE 36 29 00 00 00   .;P......j.6)...
000040	00 8B 48 30 45 02 21 00  F3 58 1E 19 72 AE 8A C7   ..H0E.!..X..r...
000050	C7 36 7A 7A 25 3B C1 13  52 23 AD B9 A4 68 BB 3A   .6zz%;..R#...h.:
000060	59 23 3F 45 BC 57 83 80  02 20 59 AF 01 CA 17 D0   Y#?E.W... Y.....
000070	0E 41 83 7A 1D 58 E9 7A  A3 1B AE 58 4E DE C2 8D   .A.z.X.z...XN...
000080	35 BD 96 92 36 90 91 3B  AE 9A 01 41 04 9C 02 BF   5...6..;...A....
000090	C9 7E F2 36 CE 6D 8F E5  D9 40 13 C7 21 E9 15 98   .~.6.m...@..!...
0000A0	2A CD 2B 12 B6 5D 9B 7D  59 E2 0A 84 20 05 F8 FC   *.+..].}Y... ...
0000B0	4E 02 53 2E 87 3D 37 B9  6F 09 D6 D4 51 1A DA 8F   N.S..=7.o...Q...
0000C0	14 04 2F 46 61 4A 4C 70  C0 F1 4B EF F5 FF FF FF   ../FaJLp..K.....
0000D0	FF 02 40 4B 4C 00 00 00  00 00 19 76 A9 14 1A A0   ..@KL......v....
0000E0	CD 1C BE A6 E7 45 8A 7A  BA D5 12 A9 D9 EA 1A FB   .....E.z........
0000F0	22 5E 88 AC 80 FA E9 C7  00 00 00 00 19 76 A9 14   "^...........v..
000100	0E AB 5B EA 43 6A 04 84  CF AB 12 48 5E FD A0 B7   ..[.Cj.....H^...
000110	8B 4E CC 52 88 AC 00 00  00 00                     .N.R......


Message header:
 F9 BE B4 D9                                       - main network magic bytes
 74 78 00 00 00 00 00 00 00 00 00 00               - "tx" command
 02 01 00 00                                       - payload is 258 bytes long
 E2 93 CD BE                                       - checksum of payload

Transaction:
 01 00 00 00                                       - version

Inputs:
 01                                                - number of transaction inputs

Input 1:
 6D BD DB 08 5B 1D 8A F7  51 84 F0 BC 01 FA D5 8D  - previous output (outpoint)
 12 66 E9 B6 3B 50 88 19  90 E4 B4 0D 6A EE 36 29
 00 00 00 00

 8B                                                - script is 139 bytes long

 48 30 45 02 21 00 F3 58  1E 19 72 AE 8A C7 C7 36  - signature script (scriptSig)
 7A 7A 25 3B C1 13 52 23  AD B9 A4 68 BB 3A 59 23
 3F 45 BC 57 83 80 02 20  59 AF 01 CA 17 D0 0E 41
 83 7A 1D 58 E9 7A A3 1B  AE 58 4E DE C2 8D 35 BD
 96 92 36 90 91 3B AE 9A  01 41 04 9C 02 BF C9 7E
 F2 36 CE 6D 8F E5 D9 40  13 C7 21 E9 15 98 2A CD
 2B 12 B6 5D 9B 7D 59 E2  0A 84 20 05 F8 FC 4E 02
 53 2E 87 3D 37 B9 6F 09  D6 D4 51 1A DA 8F 14 04
 2F 46 61 4A 4C 70 C0 F1  4B EF F5

 FF FF FF FF                                       - sequence

Outputs:
 02                                                - 2 Output Transactions

Output 1:
 40 4B 4C 00 00 00 00 00                           - 0.05 BTC (5000000)
 19                                                - pk_script is 25 bytes long

 76 A9 14 1A A0 CD 1C BE  A6 E7 45 8A 7A BA D5 12  - pk_script
 A9 D9 EA 1A FB 22 5E 88  AC

Output 2:
 80 FA E9 C7 00 00 00 00                           - 33.54 BTC (3354000000)
 19                                                - pk_script is 25 bytes long

 76 A9 14 0E AB 5B EA 43  6A 04 84 CF AB 12 48 5E  - pk_script
 FD A0 B7 8B 4E CC 52 88  AC

Locktime:
 00 00 00 00                                       - lock time

block

The block message is sent in response to a getdata message which requests transaction information from a block hash.

Field Size	Description	Data type	Comments
4	version	uint32_t	Block version information, based upon the software version creating this block
32	prev_block	char[32]	The hash value of the previous block this particular block references
32	merkle_root	char[32]	The reference to a Merkle tree collection which is a hash of all transactions related to this block
4	timestamp	uint32_t	A Unix timestamp recording when this block was created (Currently limited to dates before the year 2106!)
4	bits	uint32_t	The calculated difficulty target being used for this block
4	nonce	uint32_t	The nonce used to generate this block… to allow variations of the header and compute different hashes
?	txn_count	var_int	Number of transaction entries
?	txns	tx[]	Block transactions, in format of "tx" command

The SHA256 hash that identifies each block (and which must have a run of 0 bits) is calculated from the first 6 fields of this structure (version, prev_block, merkle_root, timestamp, bits, nonce, and standard SHA256 padding, making two 64-byte chunks in all) and not from the complete block. To calculate the hash, only two chunks need to be processed by the SHA256 algorithm. Since the nonce field is in the second chunk, the first chunk stays constant during mining and therefore only the second chunk needs to be processed. However, a Bitcoin hash is the hash of the hash, so two SHA256 rounds are needed for each mining iteration. See Block hashing algorithm for details and an example.

headers

The headers packet returns block headers in response to a getheaders packet.

Payload:

Field Size	Description	Data type	Comments
?	count	var_int	Number of block headers
81x?	headers	block_header[]	Block headers

Note that the block headers in this packet include a transaction count (a var_int, so there can be more than 81 bytes per header) as opposed to the block headers which are sent to miners.

getaddr

The getaddr message sends a request to a node asking for information about known active peers to help with finding potential nodes in the network. The response to receiving this message is to transmit one or more addr messages with one or more peers from a database of known active peers. The typical presumption is that a node is likely to be active if it has been sending a message within the last three hours.

No additional data is transmitted with this message.

mempool

The mempool message sends a request to a node asking for information about transactions it has verified but which have not yet confirmed. The response to receiving this message is an inv message containing the transaction hashes for all the transactions in the node's mempool.

No additional data is transmitted with this message.

It is specified in BIP 35. Since BIP 37, only transactions matching the filter are replied.

checkorder

This message was used for IP Transactions. As IP transactions have been deprecated, it is no longer used.

submitorder

This message was used for IP Transactions. As IP transactions have been deprecated, it is no longer used.

reply

This message was used for IP Transactions. As IP transactions have been deprecated, it is no longer used.

ping

The ping message is sent primarily to confirm that the TCP/IP connection is still valid. An error in transmission is presumed to be a closed connection and the address is removed as a current peer.

Payload:

Field Size	Description	Data type	Comments
8	nonce	uint64_t	random nonce

pong

The pong message is sent in response to a ping message. In modern protocol versions, a pong response is generated using a nonce included in the ping.

Payload:

Field Size	Description	Data type	Comments
8	nonce	uint64_t	nonce from ping

reject

The reject message is sent when messages are rejected.

Payload:

Field Size	Description	Data type	Comments
1+	message	var_str	type of message rejected
1	ccode	char	code relating to rejected message
1+	reason	var_str	text version of reason for rejection

CCodes

Value	Name	Description
0x01	REJECT_MALFORMED
0x10	REJECT_INVALID
0x11	REJECT_OBSOLETE
0x12	REJECT_DUPLICATE
0x40	REJECT_NONSTANDARD
0x41	REJECT_DUST
0x42	REJECT_INSUFFICIENTFEE
0x43	REJECT_CHECKPOINT

filterload, filteradd, filterclear, merkleblock

These messages are related to Bloom filtering of connections and are defined in BIP 0037.

alert

An alert is sent between nodes to send a general notification message throughout the network. If the alert can be confirmed with the signature as having come from the the core development group of the Bitcoin software, the message is suggested to be displayed for end-users. Attempts to perform transactions, particularly automated transactions through the client, are suggested to be halted. The text in the Message string should be relayed to log files and any user interfaces.

Alert format:

Field Size	Description	Data type	Comments
?	payload	uchar[]	Serialized alert payload
?	signature	uchar[]	An ECDSA signature of the message

The developers of Satoshi's client use this public key for signing alerts:

04fc9702847840aaf195de8442ebecedf5b095cdbb9bc716bda9110971b28a49e0ead8564ff0db22209e0374782c093bb899692d524e9d6a6956e7c5ecbcd68284
(hash) 1AGRxqDa5WjUKBwHB9XYEjmkv1ucoUUy1s

The payload is serialized into a uchar[] to ensure that versions using incompatible alert formats can still relay alerts among one another. The current alert payload format is:

Field Size	Description	Data type	Comments
4	Version	int32_t	Alert format version
8	RelayUntil	int64_t	The timestamp beyond which nodes should stop relaying this alert
8	Expiration	int64_t	The timestamp beyond which this alert is no longer in effect and should be ignored
4	ID	int32_t	A unique ID number for this alert
4	Cancel	int32_t	All alerts with an ID number less than or equal to this number should be cancelled: deleted and not accepted in the future
?	setCancel	set<int32_t>	All alert IDs contained in this set should be cancelled as above
4	MinVer	int32_t	This alert only applies to versions greater than or equal to this version. Other versions should still relay it.
4	MaxVer	int32_t	This alert only applies to versions less than or equal to this version. Other versions should still relay it.
?	setSubVer	set<string>	If this set contains any elements, then only nodes that have their subVer contained in this set are affected by the alert. Other versions should still relay it.
4	Priority	int32_t	Relative priority compared to other alerts
?	Comment	string	A comment on the alert that is not displayed
?	StatusBar	string	The alert message that is displayed to the user
?	Reserved	string	Reserved

Note: set<type> in the table above is a variable length integer followed by the number of fields of the given type (either int32_t or variable length string)

Sample alert (no message header):

73010000003766404f00000000b305434f00000000f2030000f1030000001027000048ee0000
0064000000004653656520626974636f696e2e6f72672f666562323020696620796f75206861
76652074726f75626c6520636f6e6e656374696e672061667465722032302046656272756172
79004730450221008389df45f0703f39ec8c1cc42c13810ffcae14995bb648340219e353b63b
53eb022009ec65e1c1aaeec1fd334c6b684bde2b3f573060d5b70c3a46723326e4e8a4f1

Version: 1
RelayUntil: 1329620535
Expiration: 1329792435
ID: 1010
Cancel: 1009
setCancel: <empty>
MinVer: 10000
MaxVer: 61000
setSubVer: <empty>
Priority: 100
Comment: <empty>
StatusBar: "See bitcoin.org/feb20 if you have trouble connecting after 20 February"
Reserved: <empty>

Scripting

See script.

References

[1] Block 0 Network Fork

[2] ttp://en.wikipedia.org/wiki/Unix_time#Notable.C2.A0events.C2.A0in.C2.A0Unix.C2.A0time

[1]

[2]

Protocol documentation

Common standards

Hashes

Merkle Trees

Signatures

Transaction Verification

Addresses

Common structures

Message structure

Variable length integer

Variable length string

Network address

Inventory Vectors

Block Headers

Message types

version

verack

addr

inv

getdata

notfound

getblocks

getheaders

tx

block

headers

getaddr

mempool

checkorder

submitorder

reply

ping

pong

reject

filterload, filteradd, filterclear, merkleblock

alert

Scripting

See Also

References

Navigation menu

Search